Model NO.: KPC200
Conditions of Use: Land Use
Usage: Common Units, Standby Unit, Emergency Crew
Landuse Type of Unit: Low Noise Automation Type
Excitation Mode: AC Rotating Exciter
Certificate: Ce ISO SGS Soncap TUV
Voltage: 220V/127V 380V/220V 400V/230V 415V/240V 480V/277V
Current: 380A
Engine Model: Nta855-Ga
Trademark: Kanpor
Transport Package: Plywood Case
Specification: 3400x1200x2000mm
Origin: Fujian, China(Mainland)
HS Code: 8502120000
Model NO.: KPC200
Conditions of Use: Land Use
Usage: Common Units, Standby Unit, Emergency Crew
Landuse Type of Unit: Low Noise Automation Type
Excitation Mode: AC Rotating Exciter
Certificate: Ce ISO SGS Soncap TUV
Voltage: 220V/127V 380V/220V 400V/230V 415V/240V 480V/277V
Current: 380A
Engine Model: Nta855-Ga
Trademark: Kanpor
Transport Package: Plywood Case
Specification: 3400x1200x2000mm
Origin: Fujian, China(Mainland)
HS Code: 8502120000
Construction features
1.Cold steel materials of the canopy. & Best powder paint.
2.Stainless steel locks and hinges.
3. Fireproof, waterproof and dustproof.
4.Good ventilation system and anti-heat radiating structure.
5.Effective anti-vibration devices to ensure the generator set run steadily.
6.High quality soundproof materials could efficiently reduce noise.(lower than 75-85 dB at 7 meters away)
7.Emergency stop button mounted outside.
8.Side lockable door easy for maintenance and installation.
9.Lube oil and cooling water drains piped to exterior of the canopy.
10.Access to all weather conditions.
Maintenance features

1.180° revolvable and disassemble door for easy maintenance.
2.Concave lockable access door for easy operation and indefectible.
3.Lights inside of the canopy for maintenance.

Security and Safety
1.Transparent viewing window make the control panel clear at a glance.
2.Emergency stop button mounted on the canopy exterior for urgency.
3.Cooling fluid injection hole is kept on the ceiling crust.

4.Pipe of lube oil and cooling fluid is mounted on the bottom of generator for easy let.

5.Fuel fill and battery can easy be accessed by lockable door.

6.Cooling fan and battery are fully guarded.

7.Heat insulation of exhaust smoke system inside the canopy.


1. GENERATOR DATA                               

Voltage Available:

50Hz: 380-400-415V/220-230-240V;

60Hz: 220-380-416-440-480V/110-208-220-240V

Any special voltage is also available as client's request

Prime Power:

Comply with GB/T2820-97(eqv.ISO8528).

Genset can run unlimitedly under certain power range.

One hour 10% over load in every 12 running hours is allowed;

Standby Power:

standby power is the limit value of maximum output for emergency use.

It is off-oil power,overloading is prohibited

2. MAIN SPECIFICATION

Spiral Chute Separator

Spiral chute is a device that combines the characteristics of spiral concentrator, spiral chute, shaker, and centrifugal concentrator, making it the best equipment for mining and beneficiation, especially for placer mining on seashores, riversides, sand beaches, and streams. ideal.

This equipment is suitable for sorting iron ore, ilmenite, chromite, pyrite, zircon, rutile, monazite, phosphobitite, tungsten ore, tin ore, tantalum ore with a particle size of 0.3--0.02 mm. Ores, niobium ores and other non-ferrous metals, rare metals and non-metallic minerals with different specific gravity. This equipment has the advantages of stable sorting process, easy control, wide range of allowable change of ore concentration, high enrichment ratio and high recovery rate.

structure:
The spiral chute is composed of an ore feeder, a cross (tripod), a feed chute, a spiral chute, an intercepting chute, an accumulating bucket, and a chute pillar.
How to use

Stand up the spiral chute, calibrate the vertical line, fix it in a suitable position with an iron frame or wood, send the ore to the top two feeding ports of the spiral by the sand pump, add supplementary water, adjust the concentration of the ore paddle, The ore paddle naturally swirls from the height to the bottom, and an inertial centrifugal force is generated in the rotating inclined plane flow rate. The ore is separated from the sand by the gravity and centrifugal force of the swirling flow due to the difference in the specific gravity, particle size, and shape of the ore. , the concentrate flows into the concentrate hopper and is connected out with pipes, the tailings flow into the tailings hopper is connected to the sand tank with pipes, and then drained away with a sand pump, completing the whole process of beneficiation.

Separating Spiral Chute Separator,mineral separator machine,placer mining equipment

Shenzhen Hongfa Environmental Protection Equipment CO., LTD , https://www.hongfafilterpress.com

Posted on

Genset

Model

KPC132 KPC150 KPC176 KPC200 KPC220 KPC250 KPC275 KPC330 KPC350

Rated

Power

KW/

KVA

96/120 108/135 128/160 144/180 160/200 180/225 200/250 240/300 260/325
Standby Power

KW/

KVA

105.6/132 120/150 140/176 160/200 176/220 200/250 220/275 264/330 280/350
Rated Voltage V 220V/127V 380V/220V 400V/230V 415V/240V 480V/277V 600V/346V
Speed RPM 1500/1800
Rated frequency Hz 50/60

Engine

Model

6BTA5.9-G2 6BTAA5.9-G2 6BTAA5.9-G12 6CTA8.3-G2 6CTAA8.3-G2 6LTAA8.9-G2 NTA855-GA NTA855-G1A MTAA11-G3

Engine

Power

KW 116 130 155 180 203 242 254 291 310
Air intake way Turbo Turbo Turbo Turbo Turbo Natural Turbo Turbo Turbo
Governor

Electronic

Electronic

Electronic

Electronic

Electronic

Electronic

Electronic

Electronic

Electronic

Cylinder QTY 6 6 6 6 6 6 6 6 6

Bore*

Stroke

mm*

mm

102×120 102×120 114×135 114×135 114×135 114×135 140×152 140×152 125×147

Displacement

L 5.9 5.9 8.3 8.3 8.3 8.9 14 14 10.8

Fuel

Consumption

g/

kw.h

211 208 215 215 205 197 191.8