Alert? Sorry, mistakes ... ... in our country generally believe that: "no danger alarm system alarm signal is false alarm." According to this definition, the false alarm rate of the anti-theft alarm system (in a certain period of time, the system error The ratio of the number of alarms to the total number of alarms is generally above 95%. The definition of false alarms in some Western countries is: “False alarms are actual alarms that do not require* and cause the dispatch of alarm signals, which do not include those due to adverse natural climate and other special environments that cannot be manipulated by alarm companies and users. The alarm signal.” According to this definition, the US UL standard states: “Each alarm system can only have four false alarms per year.”

alarm? Sorry, mistakes... Look at the alarm analysis and maintenance of burglar alarm system
The reason for false alarms is summarized as follows:

1. Alarm caused by malfunction of alarm equipment The product can't complete the specified function under the specified conditions and within the stipulated time. It is called fault. The types of failures are damaging and drifting.

Damaged failures include all failures of performance and abrupt failures. Such failures are usually caused by the damage of components or poor production processes (such as imaginary welding, etc.). Drift faults are caused by the drift of components' parameters and power supply voltage. For example, too high a temperature will cause a change in the resistance value of the resistor. At this time, the device will perform better or worse. In fact, factors such as ambient temperature, component manufacturing process, equipment manufacturing process, usage time, storage time, and power supply load may cause changes in the component parameters and cause drift faults.

Whether it is a damaging fault or a drift fault, it will make the system false alarms. To reduce the false alarms that result from this, efforts should be made from the following aspects.

(1) The production enterprise of alarm equipment must improve the design level and technological level of the product. At the same time as the system design, it must also be designed for reliability, such as redundant design, electromagnetic compatibility design, and three-proof design (moisture protection, salt protection) Fog, antifungal, drift reliability design, etc. On this basis, improve the reliability of product manufacturing processes, such as the strict screening of component quality; strict quality supervision and management of the production process, to ensure that product quality meets the requirements of the relevant standards.

Units or individuals that sell anti-theft alarm equipment should carry out strict incoming inspections. The inspection content is: product quality inspection certificate; industrial production license or safety certification certificate or production registration approval certificate of the production enterprise.

(2) The management department shall regularly or irregularly organize inspections and random inspections of the security market, and discover that illegal activities in the production and sale of security product activities shall be handled in strict accordance with the provisions of the “Administrative Measures for the Prevention of Security Technology Products”.

(3) The alarm system construction unit (user) shall clearly require the construction unit to use the products that have been inspected by the authorized testing agencies in the corresponding project documents; the foreign equipment shall use products that have been imported from the regular channels and inspected according to international advanced standards.

(4) In order to ensure the good working condition of the alarm system, a regular inspection and maintenance system must be established. By the way, at present, the maintenance methods of China's alarm system need to be resolved, and it is best to repair the variable-construction unit as the maintenance of a professional maintenance company. This will not only be beneficial to the use of maintenance resources (maintenance personnel, maintenance equipment, maintenance spare parts, etc.) The improvement of the maintenance level, more importantly, can improve the reliability of the security system.

2. The false alarm equipment selection caused by improper system design is the key to the system design. There are a wide variety of alarm equipments and each has its own characteristics, application scope and limitations. Improper selection can cause false alarms. Therefore, to reduce false alarms caused by improper equipment selection, system designers must be familiar with the principles, characteristics, application scope, and limitations of various alarm devices. At the same time, we must also grasp the on-site environmental conditions, climate conditions, electromagnetic field strength, and changes in illuminance in order to select alarm equipment according to local conditions.

In addition to the selection of equipment and equipment, the improper design of the system also manifests itself in the equipment installation location, installation angle, protective measures, and system wiring. For example, when a passive infrared intrusion detector is installed facing an air conditioner or ventilation fan, it will cause a false alarm of the system; if an active outdoor infrared detector is not used for proper sun protection (the sun shield is also best for protection), it is bound to Caused by the system of false alarms; alarm lines and power lines, lighting lines and other strong electric circuit spacing is less than 1.5m, without the protection against electromagnetic interference, the system will also generate false alarms.

3, false alarm caused by improper construction This part of the problem is mainly manifested in the following aspects:

(1) No strict construction according to design requirements.

(2) Improperly installed equipment or improper inclination.

(3) Solder joints have vacant welds, burrs, or shielding measures.

(4) The sensitivity of the device is poorly adjusted.

(5) Inspection equipment for construction does not meet the measurement requirements.

The solution to the above problems is to strengthen the supervision and management of the construction process and implement the safety supervision system as soon as possible. This will help improve the quality of the project and reduce the number of false alarms due to construction.

4, false alarm caused by environmental noise due to environmental noise caused by false alarm refers to the alarm system in the normal state of operation, from the principle is inevitable, but the fact is not needed, is false alarm. For example, thermal airflow causes false alarms from passive infrared intrusion detectors; high-frequency sounds cause false alarms from single-technology glass break detectors; and ultrasonic sources cause false alarms from ultrasonic detectors.

The most effective measure to reduce such false alarms is to use dual detectors (two different detectors detect the “target” at the same time, and the alarm only sends an alarm signal). However, some environmental noise detectors are powerless. For example, rats are in the protection zone; pets move around indoors. For this reason, scientists and technicians have introduced micro-processing technology into the anti-theft alarm system so that they have a certain ability to identify and think, and can judge to some extent whether it is an intruder or an alarm caused by environmental noise.

Shirts&blouses

High Neck Blouse,Ladies Shirt,Lace Blouse,Checked Shirt Womens

XUANZI GARMENT CO.,LTD. , https://www.xzgirldress.com

Posted on