Today is February 14, Valentine's Day arrived. This day is not only a time for merchants to take advantage of opportunities for various promotions, but also a great opportunity for lovers to express their affection for each other.

In other words, commercial rims are also quite a few pairs of “couples”, and most of them are “transnational love”—using a Sino-foreign joint venture to establish new companies or create new ones. With advanced technology support, one party is responsible for R&D and production and sales, thereby enhancing their respective market competitive advantages and finally achieving a win-win situation.

Among these many commercial vehicle couples, which are our "model partners" in the industry?

1, heavy truck and Man: from the physical to the spiritual combination

The cooperation between Sinotruk and Mann has been unsuccessful, and we can see that in the past few years, the main push product and sales volume of CNHTC will be known.

The introduction of MAN technology greatly assisted the structural transformation of CNHTC and improved the market performance of CNHTC in highway vehicles. According to the statistics, in 2016, the sales volume of tractors of CNHTC increased by 37% year-on-year, exceeding the industry average, accounting for 42% of the sales volume of the company, of which the proportion of the sales volume of the tractors of the sales department reached 51.2%; The strong market of mixers and dump trucks also continued to lead, with the market share reaching 71% and 35% respectively. In sales in 2016, sales of Man T/C series products increased by 59% year-on-year, and the sales volume of Mantech's products across the Group reached 51% of the total sales of heavy trucks.


With MAN's hand in hand, so that heavy truck harvested a full set of products on the Man TGA platform, from the vehicle to the engine, axles, etc., both can be described as a full of love.

Comments: Seven years of itch did not see? The full sales figures are true love.

2, Fukuda and Daimler: Fancy show of affection <br> <br> say the industry's best "toss" a pair, I am afraid none other than non-Foton Daimler.

From the “beginning acquaintance” to the “knot tie”, the two have gone through many years, during which time the topic has continued. Since Fukuda and Daimler formally held hands in 2010 (Fukuda and Daimler formally signed a cooperation agreement in July 2010), Fukuda Daimler has occupied the commanding heights of the circle for a long time. On February 18, 2012, Beijing Futian Daimler Automotive Co., Ltd. was formally established. From the year of the company, brand, and product, Futian Daimler became a big fan of the year; in 2014, Auman GTL Super Edition The market was swept across the country; by the end of 2015, the super truck project in the United States had reached the surface, and the industry’s voices were buzzed; just in 2016, Fukuda Daimler had played a new height. An international show was released at the Hannover Motor Show in Germany with its latest Auman EST Super Truck.


This year, he can show En's love as such, and I am afraid there is no other person than Futian Daimler.

Comments: Big coffee also needs small happiness, today together in my house to push a super truck, go to your home tomorrow to make a listing, it is simply: fancy show love, abuse single dog death.

3, Dongfeng Cummins: rolls on, seize the day <br> <br> ginger or the old lady said, speaking of the oldest joint venture, of course, is the Dongfeng Motor Corporation and Cummins up. As far back as 1986, Dongfeng Motor Company had realized trans-ocean cooperation with Cummins Corporation. In the past 30 years, the cooperation between Dongfeng Motor Company and Cummins has been continuously deepened from licensing production to joint venture and cooperation to joint research and development. If you use a poem to describe the cooperation between the two, it is "too long for 10,000 years, just in time."

In the 30th year of Dongfeng's cooperation with Cummins, that is, in 2016, Dongfeng and Cummins announced a shocking project in the truck industry of the car sector, the "Genesis" truck project. According to the project, Dongfeng Commercial Vehicles will jointly develop smart and efficient trucks with Cummins. The base model is Dongfeng Tianlong's flagship and will be powered by Cummins' next-generation SZ engine. This has also become the biggest attraction for Dongfeng commercial vehicles in the heavy truck market.

Dongfeng Tianlong's flagship and Cummins' new-generation SZ engine


According to reports, "Genesis" trucks will be delivered in March 2020, and 480 hp will be the first to appear on the "Genesis" trucks. By 2020, the National Six emissions will be fully implemented. Will Dongfeng and Cummins cooperate with the "Genesis" truck to be a powerful killer in the national six-card market?

Comments: The old wife can also be rejuvenated.

4, Futian and Cummins: This love "run silent"

On October 26, 2007, Beijing Foton Cummins Engine Co., Ltd. was established. In 2017, it was Fukuda's first decade of cooperation with Cummins. If there was a celebration ceremony at that time, it would be a blessing to them to be happy with the “tin wedding”!

Today, many of Foton Motor's many brands are equipped with Futian Cummins engines, ranging from light trucks to light passengers, from Auman, Ao Ling, Omar, to Tuyano, Ouhui and many more. Benefiting from the increase in the sales volume of Foton Motors, the sales of Foton Cummins engines have been the highlight of the Foton Motor sales announcement. In 2016, Foton sold 289,300 engines for its own production, and Cummins Engine sales exceeded 200,000 units, with a share of approximately 70%.

Foton Cummins ISF2.8 Engine


Comments: From Auman to Omar, to Tujano, to Ao Ling, Fukuda only loves your heart – Cummins!

5. Sichuan Nanjun and South Korea Hyundai: Love is Autonomous, Love is Coming
Forward On January 8, 2013, Sichuan Hyundai Motor Co., Ltd. held an unveiling ceremony in Ziyang City, Sichuan Province. Sichuan Modern is a commercial vehicle company formed by a joint venture between Sichuan Nanjun and Korea Modern.

Compared with other pairs of joint-venture "couples," Sichuan Nanjun and South Korea's modern "feelings" are relatively immature. However, this does not prevent them from making large-scale attacks in China's commercial vehicle market. At present, there are three brands that have been formed in Sichuan Hyundai. They are the modern brand and the modern self-owned brands of Sichuan and Nanjun. Among them, the Zhidao brand is its newly launched brand, which is mainly applicable to newly developed products after the establishment of Sichuan Modern. The goal is to grab the high-end market with a large industrial demand and to assume the heavy responsibility of Sichuan's modern capacity.

To road 800W economy tractor


Comments: Love has never gone, you are still "love period", the market is still looking forward to your warm spark of collision.

In addition to the above couples, there are many cases of joint ventures between commercial vehicle companies, such as Dongfeng Commercial Vehicles and Volvo, JAC and Navistar, Guangzhou Automobile and Hino, etc. Maybe there are diversifications in the way of joint ventures and cooperation, but they all bring more room for development because of cooperation. Especially for domestic companies, they greatly supplement the technical shortcomings and enhance their market competitiveness. On this holiday season, the first commercial vehicle network wishes them happy Valentine's Day and cooperation to a higher level!

The Push Lock Hose Ends are made from aluminium, kage fittings provide superior thread strength for smooth assembly. These on piece full flow fittings provide the best flow on the market. Kage's full flow series are a CNC machined full flow fitting which provide an uninterrupted flow. With superior wall thickness kage;s full flow series are a must for any serious racer. corrosion resistant, colour consistent, double anodizing and hand polishing adds the final touch of quality and protecition you have come to expect from Kage.

Description of Push-On Hose Ends:

Item: Push-On Hose Ends
Process: CNC machining
Design: Universall or Customized 
Material: Aluminium Alloy,Brass
Size: Custom Size
Thickness:Customized
Plating: Imitation gold, silver, brass, chrome or Custom requirement
MOQ:100pcs
Packing: 1pc polybag
QC Control: 100% inspection before packing,spot inspection before shipment
Sample time: 7days
Production time: 7-15 days,15-30days
Shipment: TNT,UPS,DHL,FEDEX,BOAT
Payment:100% in advance for small orders; 30% deposit, 70% before shipment for big orders.

Push-On Hose Ends

Push-On Hose Ends,Hose Fittings,Hose Fittings,Hose Connectors

Kage Hardware Product Co., Ltd , http://www.kage-autofittings.com

Posted on