Computerized Cutting and Stripping Machine for 50mm2 Cable

Computerized Cutting and Stripping Machine for 50mm2 Cable


Product features
1.New mode cable processing equipment that controlled by micro computer, especially for processing the high voltage power cable in the industries of new energy motor, power charging station, electronic control, BMC and etc.  which essentially solves the problem in processing the big power cable; 
2.Automatic wire cutting,  two ends stripping,  multi-layers stripping at the same time;
3.Industrial level control chip and high precise servo driving  to ensure its high speed and stable running;
4.PLC control system ,  touching screen operating;
5.Automatic wire diameter adjusting,  different power cable doesn't need to change the cutting tools;
6.Belt style driving without any pressing marks

Technical parameters  
1.Cross section: 6-50mm² ( 50mm² above  can be specially ordered) 
2. Wire diameter:  Within diameter 18 mm
3.Cutting length: 0.1-100000mm
4.Cutting precision: ±(0.2%*L+1)mm
5.Drive: 8 wheels independently servo driven
6.Stripping length: 0.1-200mm (Other size can be special ordered)
7.Tool materials: Imported high speed steel
8.Feeding speed: 0.8m/s
9.Capacity: 1000 pcs/h (it depends on the length of the wire)
10.Power:220V  50HZ
11.0.5KW
12.Air supply: 0.5 Mpa-0.7 Mpa,6m³/h
13. Weight: 95kg
14.Dimension: 700 x 500 x 430mm

Computerized Cutting and Stripping Machine for 50mm2 Cable


Product features
1.New mode cable processing equipment that controlled by micro computer, especially for processing the high voltage power cable in the industries of new energy motor, power charging station, electronic control, BMC and etc.  which essentially solves the problem in processing the big power cable; 
2.Automatic wire cutting,  two ends stripping,  multi-layers stripping at the same time;
3.Industrial level control chip and high precise servo driving  to ensure its high speed and stable running;
4.PLC control system ,  touching screen operating;
5.Automatic wire diameter adjusting,  different power cable doesn't need to change the cutting tools;
6.Belt style driving without any pressing marks

Technical parameters  
1.Cross section: 6-50mm² ( 50mm² above  can be specially ordered) 
2. Wire diameter:  Within diameter 18 mm
3.Cutting length: 0.1-100000mm
4.Cutting precision: ±(0.2%*L+1)mm
5.Drive: 8 wheels independently servo driven
6.Stripping length: 0.1-200mm (Other size can be special ordered)
7.Tool materials: Imported high speed steel
8.Feeding speed: 0.8m/s
9.Capacity: 1000 pcs/h (it depends on the length of the wire)
10.Power:220V  50HZ
11.0.5KW
12.Air supply: 0.5 Mpa-0.7 Mpa,6m³/h
13. Weight: 95kg
14.Dimension: 700 x 500 x 430mm

Kitchen ventilator, cooking utensils

Midea , https://www.mideagroups.com