HDPE Pipe Butt Fusion Welding Machine

Model NO.: TPS-RDY630

Trademark: SHILONG

Specification: CE, ISO9001, DVS2208

Origin: China

HDPE Pipe Butt Fusion Welding Machine

Â
I. Â Application:
The butt fusion pipe welding machine is widely applied in worksite, groove and workshop for butt joint between pipes as well as pipes and pipe fittings.
Â
II. Â Characters:
This machine adopts the advanced international program hydraulic station system, which can adjust the altitude pressure and add or release the pressure very accurately and stably; The electric temperature controller can heat very accurately and the real temperature can be clearly displayed on the meter. The twin clamps can hold/fix the joints very stable and accurate. This machine can be in assembly and as a whole at any option. The power supply can be specially designed as per the buyer's requirement.
Â
III. Â Technical Parameter:
Working Range: 355~630mm
Fitted with clamps: 450, 500, 560
Additional configuration of fitted for clamps: 355, 400
Power supply: Â 380V/50Hz,Â or 220V/50Hz (with electric pulley, or lift crane)
Installed motor power: 12.8 Kw
Â Working temperature: 180Â centigradeÂ ~ 250Â centigrade
Ambient temperature: -5Â centigradeÂ ~ +40Â centigrade
IV. Â Accompany Parts:
1. Basic machineÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â 2. Hydraulic Station
3. Facing ToolÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 4. Heating Mirror/plate
5. Support (Electric Controlling Cabinet)
Â
V. Â Additional Parts (At the Buyer's Option)
1. Stub End HolderÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 2. Clamp for Syphon
3. AccumulatorÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 4. Portable Timer
Â

Â

GH Series High Head Sand Suction Pumps are cantilevered centrifugal single casing pumps connected with cassette, they are characterized by excellent abrasion resistance, corrosion resistance, high reliability, reasonable structure, reliable operation and long service life etc. This series of pumps are suitable for continuously delivery of mediums with strong abrasion the particle of which is too large for common Slurry Pump to transfer. They are mainly applied to dredger, river training, mining and delivery of metal smelting slag etc. and it is particularly suitable for shield system.

Product Feature

1.Single casing structure connected with cassette, wide passage, hard alloy liner with excellent wear resistance, corrosion resistance , good reliability and good cavitation performance.

2.The bearing assembly is cylinder type structure, the bearing could be lubricated by grease or oil to fit different site condition.

3.The clearance between the impeller and the cover plate could be adjusted to ensure the pump to operate at high efficiency point.

4.Packing seal, expeller seal and cartridge mechanical seal could be selected as shaft seal to fit different site condition.

5.The discharge direction could be positioned at any angle to fit different site installation condition .
GH Series High Head Sand Suction Pumps
GH Series High Head Sand Suction Pumps,Sand Suction Pump,Sand Suction Dredge Pump,High Head Shield Machine Pump,GH Series High Head Sand Suction Pump
Shijiazhuang Soarho Machinary Co.,Ltd , https://www.xhslurrypump.com