New technology of new process for iron ore magnetic separation---magnetic basis (2)

Figure 3 is a contour plot of the constant G(a, β). When a = 3, β = 2, G(a, β) = 0.1423 is the maximum value.

Figure 4 shows a single layer solenoid closed spiral wound ring. If the pitch of the spiral wound ring is omitted, the magnetic field strength of the ring of the N turns is:

The external is 0. When r changes, H also changes. If the radius of the ring tends to infinity, and the number of turns n per unit length is constant, then the spiral winding transitions to an infinitely long solenoid whose magnetic field strength tends to be constant, ie:

[next]

B. Magnetic induction The relationship between magnetic induction (referred to as magnetic induction or magnetic induction) or magnetic flux density (referred to as magnetic density) B (unit or wei/m ² ) and magnetic field strength is:

Where μ———the permeability of the medium.
Expressed in vacuo μ _o μ, a value of 4π × 10 ^-7 (H / m). For practical purposes, μ is equal to μ _o in air. Since B and H differ by only one scale factor μ _o , both B and H can be referred to as magnetic field strength. Magnetic induction is a measurable quantity

Where q—the particle charge;
υ →———The speed of movement of charged particles.
Equation (14) can be considered as a definition of B→.
C magnetic flux The magnetic flux φ (unit is Wei [bo]) passing through a given surface is determined by the area

Thus, the magnetic flux outside the closed surface is zero.

this Diamond Wire Cutting Machine can be used for profile and slicing of brittle materials such as sapphire, monocrystalline silicon, polycrystalline silicon, alumina, ceramics, gemstones and other materials.

Particularly suitable for Profile Cutting Of Graphite Electrodes