Fuel Flow Meter(A+E 82FY) Diesel flow meters use the mechanical energy of the fluid to rotate a pinwheel (rotor) in the fluid diesel. Blades on the rotor are angled to transform energy from the fluid diesel into rotational energy. The rotor shaft spins on bearings. When the diesel moves faster, the rotor spins proportionally faster. This diesel flow meter has a wide measuring range, and the limit of the flow velocity is lower than 0.5m/s. The pressure loss is low and the impeller has strong impact resistance, anti-electromagnetic interference and anti-vibration capability. So the performance is reliable and the operating life is long. Turbine diesel flow meter has the advantages of built-in pressure & temperature sensor, high safety, compact structure, beautiful appearance and small pressure loss.
Two platen design, super open stroke.
Electrical clamp fast movement driven by servo motor and ball screw spindle, shorter cycle time, more precise( optional) .
High stiffness platen support, bigger mould weight capacity.
Pressure build- up in 4 cylinder synchronously, more even clamp force, longer service life.
Fast mould change, shorter tie- bar, easy to add additional device of tie- bar puller.
Less moving componment, less lubrication point, less maintenance cost.
Excellence European controller, touch screen, easy operation, stable and reliable.
DK Two Platen Injection Moulding Machine Two Platen Injection Moulding Machine, Electrical Injection, Two Platen Molding Machine, Hydraulic Injection Molding Ningbo Shuangma Machinery Industry Co., Ltd , https://www.bolemachinery.com
Features
--Accuracy reaching ±1.0%F·S.
--Short-term repeatability reaching 0.05%~0.2%.
--Output pulse frequency signal, which is suitable for gross metering and connection to the computer. No zero drift and strong anti-interference capability.
--3-4kHz frequency signal , and high signal resolution.
--Wide range with 1:20 for medium and large caliber, 1:10 for small caliber.
--Compact and light structure, convenient installation and maintenance, great capability.
--Suitable for measuring high pressure. Easy to be made into high-pressure meter.
--Various kinds of specified sensors.
Technical Parameters
Model Selection
Model
A+E 82F
Â
Media
Y
liquid
Q
gas (excluding stream)
DN
xx
Â
Structure
Z
integrate type
L
split type
Senor Requirement
1
normal
2
wear-resistant
3
anti-corrosive
PN
1
1.6MPa
2
2.5MPa
3
4.0MPa
4
6.3MPa
5
16MPa
6
25MPa
7
40MPa
Connection
G
non-sealed pipe thread
R
sealed thread
F
flange
J
clamp-on
K
quick-releaseÂ
Accuracy
1
0.2
2
0.5
3
1
Explosion-proof
0
N/A
1
Yes
Output
1
pulse
2
4-20mA
3
Hart
Power Supply
1
built-in battery
2
built-in battery and out 24VDCÂ
3
out 24VDC
Material
1
304L
2
316L
Model NO.: A+E-82FY
Measuring Media: Liquid
Measuring Principle: Mechanics
Measurement Object: Closed Pipeline
Certification: ISO
Item: Diesel Flow Meter
Measuring Range Ratio: 1:10, 1:15, 1:20
Temperature: -20~+120 C (-4 to 248 F)
Material: SS304L or SS316L
Power Supply: 24V DC or Battery
Transmitting Distance: <1, 000m (3280FT)
Output Signal: Pulse, 4-20mA with Hart, RS485
Explosion-Proof: Exd II Bt6
Protection: IP65
Trademark: AEAD
Transport Package: Carboard Box, Wooden Case
Origin: Shanghai
HS Code: 9026100000