ã€China Deep Hole Rig Trading Network】 The upper and lower hinge plates, and the inclined rods, columns, and hinges are used to complete the landing of a pulley block for power heads, rebar cages, and grouting ducts. A leg cylinder is distributed on the machine to achieve four corners of the landing height of the main machine 1.1 meters and 1.6 meters two, depending on the use of different machine models high cylinder. The power head of the three-ring reduction motor adopts an agency, so slow is also a fairly mature product. The four teams blocked the hydraulic cylinders on the forward leg and lowered the hydraulic system from the ground to the alignment of the hydraulic pile driver. Then the thighs of the machine shoes fell, and after the hydraulic cylinder contracted the line, the chassis was repeatedly driven by the hydraulic pile driver. The operation control room is located in the iron rig of the oil rig and the main hoisting machine in the outlook, and the windows are open on three sides, which can ensure the open vision, which is safe and comfortable. Because the hydraulic motor is stable, stable and reliable, it has the characteristics of strength, small moment of inertia and high starting efficiency, so it will be stable, there is no impact on the pile machine, no vibration, good stability, long service life and other advantages. Circular or square studs serve as a power head on both sides, guiding and resisting twisting up and down the pipe. Henan Sanli Machinery This machine pile frame is mainly composed of hydraulic walking, rod, inclined top ring beam, chassis, walking wheel mechanism, rotating mechanism, lifting, control room, hydraulic system and electrical system. For folded box sections, column structure, flange connection. It has two air-cooled motors, speed reducers, elbow, exhaust, lift frame and sliding quick components. The type of hydraulic walking of the moving mechanism. The dynamic head can be swiped to slide and detachable for checking. The large central hole reducer, high loading overload capacity, compact structure, low noise and long service life are ideal power devices for domestic drilling rigs. The rig is equipped with a box with hydraulic cylinder foldable struts that are convenient and quick to take off and land, and do not require disassembly and transportation. The cylinder is located at the front of the middle plate, under the column, and the post-pillar works. Because the hydraulic motor is stable, stable and reliable, it has the characteristics of strength, small moment of inertia and high starting efficiency, so it will be stable, there is no impact on the pile machine, no vibration, good stability, long service life and other advantages. The fuel tank is located in the middle. There are four chassis with one leg undulating and the cylinder is contracted. So this machine pulls two motors to drive, through the coupling high-speed rotating gear reducer, willpower to drive the low speed shaft, drill pipe flange rotation. The type of hydraulic walking movement mechanism. It has two air-cooled motors, speed reducers, elbow, exhaust, lift frame and sliding quick components. Take the cylinder length 1.6 meters so that the whole machine is 1.6 meters step length. 7 cylinders shrink control room operation. The hydraulic mechanism is mainly composed of seven hydraulic cylinders with limited liability. The drilling rig is jointly controlled by electrohydraulic, all the operation buttons and processing, in front, control room control panel, easy to operate. For more information, please pay attention to the China Deep Hole Rig Trading Network ()
Overhead Crane is also call Bridge Crane . An overhead crane is such that its bridge moves on elevated tracks, also called overhead traveling crane. A bridge has its bridge longitudinally move along the elevated tracks laid at both sides and its carriage laterally move along the tracks laid on the bridge to make a rectangular working scope. In this way, the room below the bridge can be made fully use of while being free of hindrance of equipment on the ground.
The overhead crane including Single Girder Overhead Crane, Double Girder Overhead Crane; more specifically single girder overhead traveling crane, electric single girder low headroom crane, single girder Suspension Crane, explosion roof crane, Casting Crane , Grab Crane , Overhead Crane With Electromagnet.
Our service
Pre-sales service:
We have R&D center to keep the accuracy for the machine. we can design by your sketch or we can give you the project design according to your need.
Manufacturing:
We posses various equipments for processing including: machining, milling, planning and grinding and etc.
Testing
All of our machine will be tested before delivery. We have perfect quality assurance system, full strict management, and advanced inspection method in order to ensure high quality product.
Delivery
1.Electric parts are packed by high quality plywood crate, to reduce distortion in conveying.
2. Main beams, end beams and trolley/winch are packed by plastic woven cloth. It can reduce abrasion during the transportation.
3. If the size are suitable for container ship, usually by container; if not, usually by bulk ship or by container after truncation
After-sales service
Oversea after-sales is available; when it is required by customer, we will send technicians to your site to installation and commissioning according to your actual environment.
Overhead Crane Overhead Crane,Overhead Crane For Sale,Overhead Bridge Crane,Used Overhead Crane Jiangxi Mide Industrial Co., Ltd. , https://www.midecrane.com
