With the development of urban construction, the working hours of sprinklers have become longer and the use has become more and more frequent, so the maintenance of sprinklers has become particularly important. Here we will introduce how to maintain the various components of the sprinkler.

1

Chassis maintenance: Chassis armor. Chassis armor is not to install a armor for the chassis, but to spray the surface of the chassis with a special elastic rubber material, this material can prevent the chassis from being rusted, reduce the degree of wear of the chassis, it can also reduce chassis vibration when driving, Reducing the noise is like protecting the chassis with an armor.

Battery maintenance: Check the electrode connections. The electrode connection of the battery is the most problematic, because the above will react with air for a long period of time to generate green oxides. This green oxide will make the generator power shortage and keep the battery at a loss. State, the battery will be aged and worn out over time, so use boiling water to wash away this green oxide.

Maintenance of the brake system: Improve inspection frequency inspection. Check the brakes to see if there is any weakness or deviation. Check the brake pedal and see if there is any noticeable change in pedaling force. Regularly clean the entire brake pipe section.

Start-up cabin maintenance: Check the various components in the cabin. The engine oil, brake fluid, and antifreeze fluid in the launch chamber are equivalent to the blood in the launching cabin and even the entire vehicle. The fluid must be kept sufficiently and not deteriorated. It must be replaced when the replacement cycle is completed to ensure the smooth flow of blood.

Of course, our sprinklers are used as public vehicles, and there will be special maintenance companies to carry out maintenance on a regular basis. However, if we can also carry out maintenance in daily life, the service life of the sprinklers can be increased. This is undoubtedly for taxpayers. It is a gospel. Next, we will introduce some of the daily maintenance methods that can be used by sprinklers.

In autumn and winter, the temperature will become lower and the air pressure will fall. At this time, the tires will be supplemented with air pressure to maintain the balance of their own air pressure. At the same time, also check whether the tire has scratches, because the rubber is easy to harden in autumn and winter and look more brittle, the tire is easy to leak, and even puncture the tire, in addition, often remove the inclusions in the tread pattern, to extend the life of the tire .

In addition, before the advent of winter, the water in the water pump and the water pipe must be drained to prevent the freezing of the water pump and the water pipe. During the severe winter season, most sprinklers will reduce or even stop construction. Therefore, the water in the pumps and pipes should be vented every time they are used, so as to avoid any problems.


Slurry Pump

slurry pump

Slurry Pump,Vertical Froth Slurry Pump,Submersible Slurry Pumps,Lined Slurry Pumps

Shijiazhuang Boda Industrial Pump Co., Ltd. , https://www.mineralslurrypump.com

Posted on