For a new car, if it is properly maintained, it can not only prolong its service life, but also improve work efficiency. In life, we often overlook these details and thus affect the cost of expenditure. Today, we learn together about the maintenance methods of sewage suction vehicles. I hope to bring some help to the riders.

1. When the dirt-absorbing body is stained with mud, the cleaning agent is to scrub the entire vehicle with a sponge, and then rinse and dry with fresh water. When the tire surface is embedded with some debris, such as nails, stones, glass, iron pieces, etc., it is necessary to spray the entire vehicle with clean water first, so that the dirt on the vehicle falls, and then wipe the entire vehicle with a damp cloth or a wet towel. The glass, after a fine day, does a full car wash.


2. When the sewer truck is cleaned, be sure to wait until the engine is thoroughly cooled down and then washed to prevent the engine from prematurely aging. Do not wash your car under the hot sun. This will leave traces of dry water on the car body. Do not wash the car in very cold weather. Once the water freezes, it will cause the paint film to crack.


3. Sewage suction car parts will be corroded, rusted, and dark due to the long-term erosion of moisture or moisture in the air and harmful gases, affecting the appearance. When such a situation occurs, if the surface is heavily rusted, a rust remover should be used for rust removal and then the replenishing process.

Buy sewage truck, just in Hubei Cheng Li! Party Manager

Temperature Controlled Water Valves

Temperature Controlled Water Valves,Temperature Sensor Valve,Water Regulating Valve

Fengshen Refrigeration Controls Co., Ltd. , http://www.shaivalve.com

Posted on