Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine, leisuwash 360 mini, leisuwash SG fully automatic car wash equipment. Automatic Car Wash Equipment,Leisuwash S90 Drying,Automatic Leisuwash S90 Drying Car Wash Machine,Leisuwash S90 Drying Car Wash Machine Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdtouchlesscarwash.com
It is necessary to use equipment that meets technical standards and safety requirements.
First, check whether the shock absorber of the oil tanker is leaking oil; make the car park on the road with poor road conditions for 10 km, park it, touch the housing of the shock absorber by hand, assume that no heat is applied, and clarify that there is no resistance inside the shock absorber. The resonator does not operate.
The oil seal gasket and the seal washer broke, and the storage cylinder cover nut was loose. The auto control, remote control, metering instruments, valves and other equipment of the oil delivery station must be overhauled and calibrated as scheduled, and an associated management system should be formulated, especially for the raw materials of the oil distribution equipment. At this moment, can participate in the appropriate lubricants, and then experiment, if the shell fever, the tanker is the lack of oil within the shock absorber, should add enough oil, if found to leak, first tighten the nut of the cylinder head, if the shock absorber is still If the oil leaks, the oil seal and the gasket may be damaged and the new seal should be replaced.
When the truck moves slowly and brakes in an emergency, if the car vibrates more violently, clarified that the shock absorber has a title, remove the damper and erect it, and clamp the lower end joint ring on the vise, and then pull and dampen the vibration. The rod should be blocked several times. At this moment, there should be unrestrained resistance. The resistance of the tanker to pull up should also be greater than the resistance to downward pressure. If the resistance is not disorderly or non-resistance, it may be the lack of oil inside the shock absorber. Or if the valve parts are damaged, the parts should be corrected or replaced. After determining that the shock absorber has a title or has failed, it should first check whether the shock absorber is leaking oil or there are traces of old oil leakage.
Leisuwash S90 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
Leisuwash S90 Car Wash Machine is an entry level car wash unit, but you won`t find any low grade components and no cost cutting on the expense of quality. Each Leisuwash S90 is built by Leisuwash employees in accordance with our usual quality standards, the low price is achieved by high standardization and the use of proven technology. The Leisuwash S90 is for clients that need a wash machine at a competitive price with higher ROI.
Together with the electrostatic grounding device can not be put on, the tanker must strictly follow the standard, the device is indeed, on schedule inspection. Assuming that the oil leakage can't be eliminated, the damping rod should be pulled out. If there is a difference in the card issuing or severity, check whether the gap between the piston and the cylinder is too large, and whether the shock absorber piston rod has any zigzag. Are there any scratches or scratches on the outside of the connecting rod and the cylinder bore? Hairline hoses are prohibited from using non-conductive polyethylene hoses as oil pipelines, and plastic containers are prohibited when handling oil products. For the current use of clamps and magnetic joints grounded, should not be randomly caught or adsorbed in the tank parts, or even the appearance of the paint. These are the basic safety knowledge. This is a helium gas for the antistatic electrode, and it is a big danger.